01
Sep3 Causes of Electric Circuit Breakers Frequently Dropping and 3 Ways to Overcome Them
The cause of the electric MCB often dropping or snapping is influenced by various factors. No need to panic, here we will provide a complete review along with ways to deal with the MCB snapping electricity.
Electric snap is one of the problems that are often experienced by residents of the house. If that happens, activities in the dwelling will be disrupted because all electronic devices that are directly connected to electricity will automatically not function. The electrical problem must have annoyed us, didn't it? Moreover, electricity that often goes out can cause electronic goods at home to potentially be damaged quickly. Then, how do you deal with the MCB often dropping or snapping?
MCB (Miniature Circuit Breaker) is one of the home electrical installation components that has a very important role. This MCB functions as a protection system in electrical installations in the event of an overload and short circuit or short circuit. Generally, a down MCB can be overcome by sliding it back to the ON (top) position of the MCB switch located on the electricity meter. However, if there are signs that the MCB is damaged, you need to replace it by involving the help of a PLN officer or electrical contractor, or Engineering at the apartment. Let's first find out why the electric MCB often goes down.
Causes of the Electric MCB Frequently Dropping
- Excessive Electricity Usage
- MCB Damage
- Short Circuit
One of the reasons why a house's electrical MCB often drops or snaps is the use of electricity that exceeds capacity. This happens because many electronic devices turn on simultaneously for a long time. If that happens, disconnect the cables for electronic devices that consume a large amount of electrical energy so that the electricity doesn't come back bad. Do not turn on electronic devices at the same time, especially if the electricity in the house is not too large.
Another cause that makes the electric MCB often go down even though the use of electronic devices is fairly reasonable, namely damage to the MCB. For us to know, a problematic or damaged MCB is generally marked by a hot device body and smells of burning. When examined, there are usually scorched marks from sparks. Most likely, this is due to loose or loose cable connections in the device. Apart from that, damage to the MCB can also be caused by a device that has been used for too long, aka the age of the device is old.
Then, how do you find out if there are signs of damage to the MCB?
Check the condition of the MCB, whether the temperature is hot or not. If it is hot, then the electric MCB must be replaced immediately. Check the MCB terminal on the kWh meter then look carefully because it does not rule out the possibility of sparks. Watch how long it takes the MCB to come back down and record the time. If the MCB goes down even though the electrical equipment is not high, it needs to be checked by asking for help from an officer. If the electrical installation is correct but the MCB still goes down, then it could be that the MCB really needs to be replaced.
If the MCB lever drops again quickly after being raised, one of the contributing factors could be a short circuit in the electrical installation. Not only that, a short circuit can also occur due to damage to the electronic equipment used. Even though the MCB problem is considered a common problem, homeowners are advised not to underestimate it. Moreover, for example, to repair it yourself because the damage could be more severe and trigger a fire, leave it to the experts for maximum results.
How to Overcome MCB Electricity Often Drops
- Control of Use of Electronic Devices The easiest way to deal with electrical MCBs is to control the use of electronic goods. If it is not very important, turn off the electronics immediately. In addition, this step can also save electricity at home, thereby reducing bills that are swelling. What often burdens our electricity and bills is an AC unit that is not routinely maintained, the amperage load will increase and cause the MCB to fall or the electricity bill to swell.
- Replace Electrical MCB
- Repairing Electrical Installation
Well, if you are sure that the MCB components have been damaged due to age, the most effective solution is to replace them with new MCBs. Currently, there are many MCBs available on the market with varied types and brands and can be selected as needed, buy good quality ones for long term use.
Another way to deal with MCB electricity that often drops, which can also be a solution, is to improve the electrical installation system at home. Call an electrician or an authorized officer to ensure that the electrical conditions at home return to normal and function safely.
Let's avoid fire hazards and damage to our homes by always carrying out regular checks on our electrical installations, including the MCB.
Biru Engineering Team
Call Us for Better Solustion on IG: @birufms.id & www.birufms.com
